Coupling | คัปปลิ้ง ยอย
CHAIN COUPLING
Chain coupling is composed of a duplex roller chain and two sprockets. The function of connection and detachment is done by the joint of chain.It has the characteristics of simplicity, high efficiency easy-off and nice out-looking.
**คัปปลิ้งโซ่ ยอยโซ่ มีสินค้าพร้อมส่ง** ตั้งแต่เบอร์ 4012 จนถีง 16022
PIN AND BUSH COUPLING
Pin and bush coupling accept parallel,angular and axial misalignment and can provide considerable torsional flexibility. 80 or 90 shore hardness close fitting flexible element.Simple assembly.
**คัปปลิ้งสลัก ยอยสลัก มีสินค้าพร้อมส่ง** ตั้งแต่ขนาด 3.5 นิ้ว จนถึง 25 นิ้ว
FLEX COUPLING
Flex Coupling can accommodate simultaneous maximum misalignment in all planes without imposing undue loads on adjacent bearing and the excellent shock-absorbing properties of the flexible tyre reduce vibration and torsional oscillation.
**คัปปลิ้งยาง มีสินค้าพร้อมส่ง**ตั้งแต่เบอร์ F40 ถึง F200
FLEXIBLE JAW COUPLING
Flexible Jaw coupling offer a range of hub and element selection to meet the demand for a low cost, general purpose spacer type flexible coupling. They allow for incidental misalignment, absorb shock loads and dampen out small amplitude vibrations.
**Jaw coupling มีสินค้าพร้อมส่ง**ตั้งแต่ไซส์ HRC070-HRC420
Compared with other high torque coupling, the gear coupling has the properties of compact structure,light weight,long service life,and the loss of transmitted torque could be reduced furthest,and it almost has no noise and vibration during it’s high speed rotation.
**เกียร์คัปปลิ้ง นำเข้าจากเกาหลี** Type PDG มีสินค้าพร้อมส่ง
GRID COUPLING
Grid coupling are a popular coupling option where both high torque levels and dampening requirement exist. Grid coupling have a unique ability to reduce vibration by as much as 30% and cushions shock loads to safeguard driving and driven power transmission equipment.
** กริดคัปปลิ้ง นำเข้าจากเกาหลี ** มีสินค้าพร้อมส่ง ตั้งแต่ –1140TH
DISC COUPLING
Disc coupling is the ideal solution in medium to high torque applications that require torsional rigidity,offer some allowance for misalignment,and do not require lubrication including single disc,double disc,and spacer for both horizontal and vertical mounting.
**ดิสก์คัปปลิ้ง มีสินค้าพร้อมส่ง**Type Single disc No.5S-55S
GEAR SLEEVE COUPLING
Gear sleeve coupling is combination of steel with polyamide ensure good slinding properties,important parallel,angular and end float misalignment of the shaft, leads to low maintenance and wear operation,lubrication free resistant,can be used at a temperature –25°C to 80°C.
**ไนล่อนสลีฟคัปปลิ้ง มีสินค้าพร้อมส่ง**ตั้งแต่ไซส์ GF-14 จนถึง GF-65
The advantage of these over the conventional technique of welding components together is that the shaft can be easily replaced and they don't require a keyway. They consist of two tapered rings with screws that tighten the assembly pulling one taper up on the other expanding and locking the surfaces against each other. Removable shafts on drum assemblies, pulleys and sprockets on line shafts